SD416

This flexible and compact distribution amplifier has 4 inputs and 16 outputs. In a typical configuration, the allocation amplifier receives 4 input signals and assigns each input to 4 independent outputs. Each of the 16 outputs can be individually adjusted through its front panel Potentiometer. Similarly, each of these four inputs can be independently controlled. Each input has a four LED level meter to help users set the optimal operating level. The balanced input stage is designed for high common mode suppression and radio frequency immunity. The output line drive is short-circuit protected and designed around the industry standard 5532 operational amplifier. The distribution amplifier is powered by an internal power supply embedded around a low magnetic field ring transformer, producing very low noise and high performance. The 4x4 architecture allows for as many configurations as possible. Each input and four output module is independent of the other modules. Connect the input of the distribution amplifier to four separate audio sources, providing four single output channels, each with four outputs, or two stereo audio feeds. Simple rewiring - stringing input information together - produces an alternative 2x8 configuration that outputs stereo audio to 8 outputs. The left channel audio is connected to inputs # 1 and # 2, while the correct channel is connected to inputs # 3 and # 4. Bundle all inputs together and allocate amplifiers to distribute a single MONO audio source to all 16 outputs. Use a distribution amplifier to meet all your audio distribution requirements. Distribution amplifier characteristics √ 4 balanced inputs and 16 balanced outputs √ Can be configured as 4x4, 2x8, or 1x16 √ 4 LED input level meters √ Main input stage plus four independent output level controls Application: Conference systems and linear array systems suitable for signal matrix allocation and volume control...